As an Amazon Associate I earn from qualifying purchases.
Track saw precision: making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension. Reduce tear out: prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Stop the guesswork: effortlessly attach the ngx saw plate to your right- or left-handed saw with the adjustable quick-release clamps.

Non-marking grip: each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations. Solid, secure hold: the strong quick clamping mechanism grips wood of varying thickness, so you can make angled cuts without worrying that your straight edge will come loose.



By adding the bora NGX 50-inch aluminum extension. Clamps firmly: this straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project.

Fully adjustable - the sliding side points and locking screw allow it to accommodate almost any size Jigsaw.


Additional accessories: the bora wtx saw guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the Router Guide.
It’s long 100-inch length allows you to saw with precision and skill. 100 inches of cutting: with your purchase you will receive a 50" WTX Clamp Edge and WTX 50" Extension, connect the pieces together for 100 inches of straight cuts. Locked in: the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood.


1. Bora
#ad
Includes 50-inch Clamp Edge, BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts, Pro Saw Plate, 544500, Track Clamps, 50-inch Extension, Non-Chip Strip
#adBora #ad - Attach it to the bottom of the NGX Clamp Edge for a smooth finish. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts. 100” of cutting capacity: the ngx 50” clamp edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber.Track saw precision: making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
More information #ad
And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension. Reduce tear out: prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Stop the guesswork: effortlessly attach the ngx saw plate to your right- or left-handed saw with the adjustable quick-release clamps.
Brand | Bora #ad |
Manufacturer | Affinity Tool Works #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 10.09 Pounds |
Width | 0 Inches |
Part Number | 544500 |
Model | 544500 |
More information #ad
2. Bora
#ad
Two-Pack, BORA Track Clamps, Securely Cut Any Angle with WTX and NGX Clamp Edge Systems, 542011, Saw Guide Accessory for Woodworking, Carpentry, DIY
#adBora #ad - Easily tighten or adjust the clamp with the speed nut and lock it in place. Versatile: sturdy construction makes them perfect for use as a work stop, a vise, or to increase your holding power.Non-marking grip: each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations. Solid, secure hold: the strong quick clamping mechanism grips wood of varying thickness, so you can make angled cuts without worrying that your straight edge will come loose.
More information #ad
Cut any angle: bora track clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate. Easy set up: attach the track clamp to the top or bottom of the rail for maximum grip.Brand | Bora #ad |
Manufacturer | Bora Portamate #ad |
Height | 1 Inches |
Length | 14 Inches |
Weight | 0.5 Pounds |
Width | 7 Inches |
Part Number | 542011 |
Model | 542011 |
Warranty | 1 year |
More information #ad
3. Bora
#ad
Straight Cut Guide for Circular Saws, BORA 100" NGX Clamp Edge, 544100, Includes 50-Inch Clamp Edge & 50-Inch Extension for 100-Inch Cutting Length
#adBora #ad - Clamping end moves with handle for easy adjustability from one side. Includes bora ngx 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors.More information #ad
Locking handle grabs work surfaces for a secure grip that won’t budge. Use with circular saws, routers, Jig saws, and other portable power tools. Made of heavy-gauge, rigid aluminum for extreme durability.Brand | Bora #ad |
Manufacturer | Bora #ad |
Height | 0.75 Inches |
Length | 100 Inches |
Weight | 4 Pounds |
Width | 3 Inches |
Part Number | 544100 |
Model | 544100 |
Warranty | 1 year |
More information #ad
4. Bora
#ad
Bora NGX Saw Plate Includes 55" Non-Chip Strip That Elimates Tear Out, 544001, Designed for Straight Cuts While Using The NGX Clamp Edge System
#adBora #ad - Aluminum guide rails Position Your Saw Accurately Every Time. Fixed center molded Channel Reduces Blade Offset And Guesswork. Quick-release clamps are adjustable So Your Saw Goes On And Off The Plate Effortlessly.More information #ad
Self-adhesive non-chip strip attaches to the bottom Of Your Ngx Clamp Edge And Reduces Top Edge Tear-Out For A Smooth Finish.Brand | Bora #ad |
Manufacturer | PROOK #ad |
Height | 19.5 Inches |
Length | 11 Inches |
Weight | 2 Pounds |
Width | 2.5 Inches |
Part Number | 544001 |
Model | 544001 |
Warranty | 1 year |
More information #ad
5. Bora
#ad
544050, Straight Cut Guide for Circular Saws, BORA 50” NGX Clamp Edge, Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados
#adBora #ad - Use with any circular saw: this guide is compatible with any brand of circular saw, not just Bora Tools. Circular saw guide for large sheets: the bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw.By adding the bora NGX 50-inch aluminum extension. Clamps firmly: this straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project.
More information #ad
For big projects, easily increase the length up to 100 in. Use it with circular saws, routers, and jigsaws. Extreme durability: made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.Brand | Bora #ad |
Manufacturer | Bora #ad |
Height | 2 Inches |
Length | 58 Inches |
Weight | 2 Pounds |
Width | 3 Inches |
Part Number | 544050 |
Model | 544050 |
Warranty | 1 year |
More information #ad
6. Bora
#ad
Bora Jigsaw Guide For WTX or NGX Clamp Edge. Use for making Straight Cuts & As A Steady Guide for your Jigsaw -542009
#adBora #ad - An ideal woodworking accessory – made to use with our Bora Clamp edge range to help you achieve straight cuts with your Jigsaw. Easy to use - the jigsaw guide attaches easily to the Bora clamp edge, and your Jigsaw seamlessly fits into it, allowing for precise straight cuts.Fully adjustable - the sliding side points and locking screw allow it to accommodate almost any size Jigsaw.
More information #ad
Adjustable pointer guide keeps cuts true. Solid design - with two "tongue and groove" Points that slide into the Bora clamp Edge's side grooves, it's a firm, steady guide for your Jigsaw. Made for jigsaws - this jigsaw guide is specifically designed to fit most jigsaws.Brand | Bora #ad |
Manufacturer | PROOK #ad |
Height | 2 Inches |
Length | 8.5 Inches |
Weight | 0 Pounds |
Width | 5.5 Inches |
Part Number | 542009 |
Model | 542009 |
Warranty | Manufacturer Warranty |
More information #ad
7. Bora
#ad
Straight Cut Guide for Circular Saws, 546050, BORA New 48" NGX Clamp Edge, 48-Inch Cutting Length
#adBora #ad - Quick lock Lever for Quick Clamping. 48” cutting Capacity. Made of heavy gauge, rigid aluminum. Accurate, Fast Cuts every time.More information #ad
Brand | Bora #ad |
Manufacturer | Affinity Tool Works #ad |
Part Number | 546050 |
Model | 546050 |
More information #ad
8. Bora
#ad
545100, Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking, Carpenters and DIY, Contractors, Guide for Circular Saws, 100 Inch Cutting Length
#adBora #ad - Get it straight every time: this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts. Make measuring easy: the wtx clamp edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy.Additional accessories: the bora wtx saw guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the Router Guide.
More information #ad
Suited for your needs: the modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. The locking handle grabs surfaces for a secure edge that won't budge while you cut. It’s long 100-inch length allows you to saw with precision and skill. 100 inches of cutting: with your purchase you will receive a 50" WTX Clamp Edge and WTX 50" Extension, connect the pieces together for 100 inches of straight cuts. Locked in: the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood.
Brand | Bora #ad |
Manufacturer | Affinity Tool Works #ad |
Height | 1.38 Inches |
Length | 62.75 Inches |
Weight | 3 Pounds |
Width | 3 Inches |
Part Number | 545100 |
Model | 545100 |
More information #ad
9. Bora
#ad
Straight Cut Guide for Circular Saws, 546036, BORA New 36" NGX Clamp Edge, 36-Inch Cutting Length
#adBora #ad - Quick lock Lever for Quick Clamping. 36” cutting Capacity. Accurate, Fast Cuts every time. Made of heavy Gauge, Rigid Aluminum.More information #ad
Brand | Bora #ad |
Manufacturer | Affinity Tool Works #ad |
Part Number | 546036 |
Model | 546036 |
More information #ad
10. Bora
#ad
BORA 100" WTX Clamp Edge and Saw Plate Set for Woodworking, Carpenters and DIY, 100 Inch Cutting Length | 545106K, Contractors, Guide for Circular Saws
#adBora #ad - Length-62. 75 inch, width-3 inch, Height-1. 5 inch. Locking clamp edge handle grabs work surfaces for a secure edge that won't budge. Wtx clamp edge is made of heavy-gauge, extruded aluminum for extreme durability. Adjustable channel on saw plate fits a wide variety of straight edges up to 3.More information #ad
Adjustable clamp end on straight edge slides easily up and down to fit material to be cut. Clamp edge and extension include ruled edge for easy measuring. 5” wide. Includes 50-inch wtx clamp edge, 50-inch WTX clamp edge extension, connectors, and WTX saw plate.Brand | Bora #ad |
Manufacturer | Affinity Tool Works #ad |
Part Number | 100" WTX Clamp Edge and Saw Plate Set |
Model | 545106K |
More information #ad